Makers' Alliance Wiki

Current Status: functional when last used

This is a Harbor Freight sand/media blaster.

Usage: Due to noise issues, it's probably best to roll the cart out either outside (weather permitting) or at least out of the space proper. One should also not run the compressor full bore for too long. Originally, a vacuum hose attachment was being used, but actually clogs up the vacuum.

To-Do List

• remove the lamp fixture (it gets clogged with grit and is effectively useless), and replace with a cheap battery-powered LED taplight (and consider its replacement an expense of using it)
• A new window would be nice. We do have a bunch of polycarbonate sheet on hand to do this…
• New gloves should be done (should be 7“ x 24”)
• There's a vague plan afoot to add a pneumatic vibrator underneath with some mechanism to actuate it to pull the sand into the feeder. pneumatic vibrator has been acquired, but would need some kind of splitting manifold, and a button valve to activate it.